PPF Brands Compared: XPEL, STEK, SunTek, 3M and More vs CoaterZ PPF (2026)

XPEL, STEK, SunTek, 3M, LLumar, KAVACA, PurePPF, GSWF and CoaterZ all make self-healing paint protection film. This guide puts their published specs side by side, including thickness, self-healing, top coat, finishes and warranty, so you can compare like for like. Every competitor spec comes from the manufacturer’s own pages and data sheets, checked in October 2026.

Quick answer

Most premium PPF brands land in a similar range: about 7 to 10 mil thick depending on the grade, with most clear films near 8 mil, a self-healing top coat, and a 10 to 12-year limited warranty. XPEL, 3M, SunTek and LLumar list 10 years; STEK, KAVACA and PurePPF list up to 12 years under certain conditions. CoaterZ Clear V3 PPF is 8.74 mil, self-healing and stain and yellowing resistant, and CoaterZ PPF comes in five finishes, and CoaterZ shops list a 10-year warranty on film and installation. The bigger difference between any two jobs is usually the installer, so pick a trained shop first and the film second.

PPF brands compared: specs side by side

Thickness is measured differently from brand to brand. Some quote the film with its top coat and adhesive, some without, and none include the release liner. Treat a 0.5 mil difference as roughly equal, and compare each brand’s data sheet if it matters to you.

Brand / filmThicknessSelf-healingTop coatFinishesManufacturer warranty
XPEL ULTIMATE PLUS8 mil (TDS: 7.6 mil without liner)Yes, with heatElastomeric self-healing clear coat, stain resistantGloss clear; black version10-year limited
XPEL STEALTHAbout 7.9 mil without liner (TDS)Yes, with heatSatin self-healing clear coatSatin (matte look)10-year limited
STEK DYNOshield8 milYes, heat or hot waterNano-ceramic infused hydrophobic top coatHigh gloss10-year limited (STEK USA); STEK lists up to 12 years with maintenance conditions
SunTek Ultra7 to 8 milYes, engine or sun heatHydroResist stain-resistant top coatHigh gloss or matte10-year limited
3M Scotchgard Pro Series8 milYesStain-resistant clear coat, low orange peelGloss or matte10-year limited
LLumar PlatinumAbout 7 to 8 milYes, engine or sun heatHydroGard water-repellent top coatGloss or matte10-year limited
Ceramic Pro KAVACAAbout 7.4 mil (Ceramic Coated datasheet)Yes; Ceramic Pro says scratches heal without added heatNano-ceramic infused hydrophobic top coatGloss, ceramic-coated gloss, matte, colors12-year limited; Ceramic Pro also offers limited lifetime coverage tied to annual certified service
PurePPF (Pure Protection Film)8 mil (Crystal Clear)YesSelf-healing top coatClear gloss, matte, colors12 years clear and matte; 10 years colored
GSWF DEFENDERAbout 7.5 to 10 mil, by gradeYes, sun, warm water or heat gunVaries by grade, including a hydrophobic gradeClear gloss, satin/matte, 50+ colorsVaries by grade and climate zone; GSWF says at least 8 years
CoaterZ PPF8.74 mil (Clear V3)Yes, sun or warm waterSelf-healing top coat, stain and yellowing resistantGloss clear, satin clear, gloss black, matte black, satin blackClear PPF: 10-year limited warranty when installed by a CoaterZ shop or approved CoaterZ installer (terms)

Warranties are limited warranties that cover manufacturing defects such as yellowing, cracking, bubbling or delamination. None cover rock chips that go through the film, collision damage or poor care. Most require installation by an authorized installer.

The big PPF brands, one by one

XPEL ULTIMATE PLUS and STEALTH

XPEL is one of the best-known PPF brands in the US. ULTIMATE PLUS is its best-selling clear gloss film. XPEL lists it at 8 mil, and its technical data sheet shows a 6 mil polyurethane layer, a 0.5 mil self-healing clear coat and adhesive, about 7.6 mil without the release liner. The clear coat uses elastomeric polymers so light scratches and swirls heal over time with heat. XPEL also makes a thicker ULTIMATE PLUS 10 and a hydrophobic version called ULTIMATE FUSION.

STEALTH is XPEL’s satin film. It turns gloss paint into a satin look, or protects factory matte paint, and measures about 7.9 mil without the liner. Both films carry a 10-year limited warranty from XPEL against yellowing, cracking, blistering and delamination when installed by an authorized installer, and the warranty can transfer to a new owner with proof of the install date.

Good fit for: drivers who want a widely available brand with a large installer network and published spec sheets.

XPEL ULTIMATE PLUS on the manufacturer’s site

STEK DYNOshield

STEK’s DYNOshield is an 8 mil clear, high-gloss TPU film with a nano-ceramic infused top coat that STEK says is bonded during manufacturing. That top coat makes it strongly hydrophobic, so water and dirt rinse off more easily. It self-heals with heat or hot water.

STEK USA lists a 10-year warranty against delamination, yellowing, bubbling and cracking, and STEK’s global warranty pages describe up to 12 years when its maintenance conditions are met.

Good fit for: owners who want a slick, water-beading gloss film without adding a separate coating.

STEK DYNOshield on the manufacturer’s site

SunTek Ultra

SunTek, part of Eastman, sells PPF Ultra in high gloss and matte. SunTek lists a 7 to 8 mil thickness range and a HydroResist top coat that limits water and dirt build-up for better stain resistance. Light scratches heal with heat from the engine or the sun.

Professionally installed Ultra carries a 10-year manufacturer’s limited warranty against cracking, bubbling and yellowing. SunTek also offers other lines, such as Reaction, with different warranty terms.

Good fit for: drivers who want gloss or matte from the same product line.

SunTek Ultra on the manufacturer’s site

3M Scotchgard Paint Protection Film Pro Series

3M’s Pro Series is an 8 mil self-healing film in gloss and matte. 3M highlights low orange peel for clarity, so the film is hard to spot even on white paint, plus stain and weather resistance.

In the US and Canada, 3M warrants Pro Series for 10 years against yellowing, bubbling and cracking when installed by a 3M certified installer, and registered installs can be shared with Carfax by VIN.

Good fit for: owners who value a long-established brand and a matte option.

3M Scotchgard Paint Protection Film Pro Series on the manufacturer’s site

LLumar Platinum PPF

LLumar, also an Eastman brand, makes Platinum PPF in gloss and matte. Its datasheets put it in the 7 to 8 mil range. The gloss version has a self-healing surface that uses engine or sun heat, and HydroGard technology adds a water-repellent, stain-resistant layer.

LLumar backs Platinum with a 10-year manufacturer’s limited warranty through its dealers.

Good fit for: drivers who already use a LLumar dealer for window film and want one shop for both.

LLumar Platinum PPF on the manufacturer’s site

Ceramic Pro KAVACA

KAVACA is Ceramic Pro’s PPF line, with Instant Healing, Ceramic Coated, Matte and color films. Ceramic Pro’s datasheet lists KAVACA Ceramic Coated at about 187 microns, roughly 7.4 mil. Its top coat is infused with Ceramic Pro’s nano-ceramic technology during production, so the film comes off the roll hydrophobic. Ceramic Pro says light scratches heal without added heat.

Ceramic Pro advertises a 12-year limited warranty, and its aftercare documents describe a limited lifetime option tied to annual service by a certified installer. Installs are recorded on the vehicle’s Carfax report.

Good fit for: owners who want PPF and a ceramic-style finish in one step, and who will keep up annual service.

Ceramic Pro KAVACA on the manufacturer’s site

PurePPF

PurePPF (Pure Protection Film) sells clear, matte and colored films through authorized dealers. Its Crystal Clear film is an 8 mil TPU film with a self-healing top coat.

PurePPF lists a 12-year warranty on clear and matte films and 10 years on colored films, covering bubbling, cracking, delamination and discoloration, when installed by an accredited PurePPF installer.

Good fit for: drivers who want a long clear-film warranty or a colored film from the same brand.

PurePPF on the manufacturer’s site

GSWF DEFENDER

GSWF sells its DEFENDER clear PPF in several grades, plus satin/matte and more than 50 colored films. Thickness depends on the grade, from about 7.5 mil up to about 10 mil for its extra-thick grade. GSWF films self-heal with sun, warm water or a heat gun, and GSWF says its clear films resist yellowing.

Warranty length varies by grade and by climate zone. GSWF says its clear PPF is covered for at least 8 years, and installs are registered in its warranty system.

Good fit for: shops and drivers who want a wide range of grades and colors.

GSWF DEFENDER on the manufacturer’s site

CoaterZ PPF

CoaterZ installs paint protection film every day at its shops in Palm Harbor, Lutz and Sarasota, Florida, and supplies its own CoaterZ PPF to approved installers across the USA. Here is what CoaterZ publishes about the film today:

  • Thickness: 8.74 mil for CoaterZ Clear V3 (gloss clear).
  • Self-healing: a self-healing top coat. Light swirls and fine scratches in the top layer fade with heat from the sun or warm water.
  • Top coat: stain and yellowing resistant, optically clear.
  • Finishes: gloss clear, satin clear, gloss black, matte black and satin black.
  • Rolls for installers: 60 inch and 72 inch widths, 50 feet long.
  • Warranty: CoaterZ Clear PPF carries a 10-year limited warranty when installed by a CoaterZ location or an approved CoaterZ installer. Full terms, including what it covers and how registration works, are on the Clear PPF warranty page.

What makes CoaterZ different is that the people who supply the film also install it on customer cars every day. Approved installers get the same film CoaterZ puts on cars in its own shops, plus advice from a working shop on product choice, install tips and troubleshooting.

Good fit for: Tampa Bay drivers who want film installed by the brand’s own shops, and shops looking for a PPF supplier run by installers.

How to choose a PPF brand

  1. Pick the installer first. Prep, panel cutting, edge wrapping and clean conditions decide how the film looks on day one and how it holds up in year five. A top film installed poorly will not beat a good film installed well.
  2. Choose the finish. Gloss keeps factory paint looking factory. Satin or matte films turn gloss paint satin or protect factory matte paint. Black and colored films change the look completely. See our fashion PPF options for colors.
  3. Decide on the top coat. Hydrophobic or ceramic-infused top coats bead water and wash easier. Standard self-healing top coats can be paired with a ceramic coating over the film.
  4. Read the warranty, not just the number of years. Check what is covered, whether annual service is required, whether it transfers when you sell, and who handles claims.
  5. Match coverage to how you drive. Full front, track pack or full body changes the result more than the brand does. Our guide to PPF coverage packages walks through each option.

If self-healing is the main thing you care about, our self-healing PPF brands guide goes deeper on how each top coat heals. New to PPF? Start with what paint protection film is and how it works.

Head to head: XPEL vs STEK, SunTek and LLumar

STEK vs XPEL

Both are 8 mil gloss films with 10-year limited warranties in the US. STEK DYNOshield has a nano-ceramic top coat bonded during manufacturing, so it beads water from day one. XPEL ULTIMATE PLUS uses an elastomeric self-healing clear coat.

SunTek vs XPEL

SunTek Ultra is 7 to 8 mil with a HydroResist top coat and comes in gloss or matte. XPEL offers ULTIMATE PLUS for gloss and STEALTH for satin. Both carry 10-year limited warranties.

LLumar PPF vs XPEL

LLumar Platinum is 7 to 8 mil, in gloss or matte, with a HydroGard water-repellent layer and a 10-year limited warranty through LLumar dealers. It’s a good fit if you already use a LLumar dealer for tint.

How long does XPEL PPF last?

XPEL backs ULTIMATE PLUS and STEALTH with a 10-year limited warranty against yellowing, cracking, blistering and delamination. Real life depends on sun exposure, washing and how well the film was installed. CoaterZ Clear V3 (8.74 mil) carries a 10-year limited warranty when a CoaterZ shop or approved installer fits it.

What changes a PPF quote

  • Coverage: partial front, full front, track pack or full body
  • Film and finish: gloss, satin or color
  • Paint correction before film
  • Vehicle size and complexity

Compare quotes on the same coverage and film.

Looking for XPEL PPF near you in Tampa?

CoaterZ isn’t an XPEL installer. For XPEL film, use XPEL’s dealer locator. To compare CoaterZ Clear V3 side by side, visit a CoaterZ shop in Palm Harbor, Lutz or Sarasota.

Is XPEL the best PPF? Alternatives to weigh

XPEL is a strong choice with a large installer network. Common alternatives include STEK, SunTek, 3M, LLumar, KAVACA and CoaterZ. Pick on finish, top coat, warranty terms and, most of all, the installer.

More PPF questions

How much does XPEL PPF cost?

It depends on coverage, film and prep. Get a written quote that names the panels covered.

Does XPEL PPF come with a warranty?

Yes, a 10-year limited warranty from XPEL when an authorized installer fits it.

Is LLumar PPF as good as XPEL?

Both list 10-year limited warranties and self-healing top coats. Choose on finish and on the installer.

Get CoaterZ PPF installed in Tampa Bay

CoaterZ installs PPF at three Florida shops. Each shop can walk around your car with you and recommend coverage and a finish:

Outside Tampa Bay? Use the CoaterZ Find an Installer map to find an approved shop near you.

Become a CoaterZ PPF installer

CoaterZ is also a PPF distributor run by installers. The CoaterZ Installer Program is open to installers and detail shops across the USA that offer PPF, ceramic coating, window tint, detailing or vinyl wrap.

  • Wholesale access: installer-only pricing on CoaterZ PPF, window tint, ceramic coatings and detail supplies, shown after your shop is approved and logs in.
  • The same film CoaterZ installs: self-healing PPF in five finishes, including 8.74 mil Clear V3, in 60 inch and 72 inch by 50 foot rolls.
  • Support from a working shop: help with product choice, install tips and troubleshooting.
  • Get listed: approved shops can appear on the Find an Installer map, which shows four levels: Authorized (Level 1), Certified (Level 2), Pro (Level 3) and Elite (CoaterZ corporate and franchise shops).

The application takes about two minutes. CoaterZ reviews every shop and emails you once you are approved. Apply to become a CoaterZ installer.

Frequently asked questions

Is CoaterZ PPF as good as XPEL?

Both are self-healing urethane paint protection films. XPEL ULTIMATE PLUS is listed at 8 mil with a 10-year limited warranty. CoaterZ Clear V3 is 8.74 mil with a self-healing top coat, and CoaterZ shops list a 10-year warranty on film and installation. For most drivers, the quality of the install matters as much as the brand on the roll.

How thick is CoaterZ PPF?

CoaterZ Clear V3 paint protection film is 8.74 mil. Brands measure thickness in different ways, with or without the top coat and adhesive, so compare spec sheets rather than headline numbers alone.

Does CoaterZ PPF self-heal?

Yes. CoaterZ PPF has a self-healing top coat, so light swirls and fine scratches in the top layer fade with heat from the sun or warm water. Deep cuts that go through the film do not heal, which is true of every brand.

What finishes does CoaterZ PPF come in?

CoaterZ lists five finishes: gloss clear, satin clear, gloss black, matte black and satin black. CoaterZ shops also install colored fashion PPF.

What warranty comes with CoaterZ PPF?

CoaterZ shops list a 10-year warranty on film and installation. Always ask your installer for the written warranty terms before the job starts.

Which PPF brand is best?

There is no single best brand for every car. XPEL, STEK, SunTek, 3M, LLumar, KAVACA, PurePPF, GSWF and CoaterZ all make self-healing films with multi-year warranties. Choose on finish, top coat, warranty terms and, most of all, the installer.

How do I become a CoaterZ PPF installer?

Apply on the CoaterZ installer page. The application takes about two minutes, CoaterZ reviews every shop, and approved shops get installer-only wholesale pricing on CoaterZ PPF, window tint, ceramic coatings and detail supplies.

Where can I get CoaterZ PPF installed?

CoaterZ installs PPF at its own shops in Palm Harbor, Lutz and Sarasota, Florida. Outside Tampa Bay, use the CoaterZ Find an Installer map to locate an approved installer.

Sources

Competitor specs are from each manufacturer’s published product pages, data sheets and warranty documents as of October 2026: XPEL product specifications, XPEL warranty, STEK DYNOshield, SunTek PPF Ultra, 3M Scotchgard Pro Series, LLumar Platinum, Ceramic Pro KAVACA, PurePPF warranty and GSWF clear PPF. Manufacturers update their products and terms, so confirm current details with your installer. XPEL, STEK, SunTek, 3M, Scotchgard, LLumar, Ceramic Pro, KAVACA, PurePPF and GSWF are trademarks of their owners.